Custom Venturi Steam Recovery Solutions

For applications which involving pumping, compressing or recovering waste and flash steam Morris Ejector Technologies can design and manufacture a custom Thermocompressor to suit your application specific requirements.

Thermocompressors are a type of steam ejector designed specifically for compressing / boosting low pressure steam using a high pressure motive steam.

Thermocompressors

Are a specific type of steam ejector which has steam as a motive and suction fluid. They are primarily designed for boosting & recycling low pressure waste steam.

Up to 10:1 compression ratios from suction to discharge pressure are achievable with a single Thermocompressor. A greater level of compression can be achieved by installing multiple Thermocompressors in series.

As standard Thermocompressors have a fixed internal geometry and therefore are optimised for a specific fixed operating duty. However coupled with an actuator and spindle this creates a variable area nozzle which allows the internal geometry to be altered and therefore performance across a range of operating duties is possible.

Alternatively a range of operation can be achieved by installing varying sizes of Thermcompressor in parallel so that they can be turned on / off according to loading requirements.